transformer logo for car 1.Voltage:12V-24V 2 for all cars 3 high power 3W or 5W led 4.CE,RoHS
Hottest!!! 12V 5W full color cree transformer logo for car
Cool New driving experience for car fans: car logo will display on the ground when the door is open !
2000pairs have been sent to customers within last 4 weeks !!!
very brighter and high resolution !
Parameters:
Power: | 5 watt/pc & 3W/pc |
total power/set or pair: | 10W |
Ingress Protection: | IP65 |
Voltage: | 9-16V |
Lifespan: | 50000hrs |
Viewing Angle: | 120-270 |
Shockproof | Yes |
All set | 2pcs light + 1pcs drill |
Working temperature | -40°C to 105°C |
Shell Material | Aluminum back cover |
Warranty: | 1 year |
Product Size | D28*L84mm & D21*L62mm |
Vehicle Applied: | Universal |
Types of transformer logo for car :
most of the popular car logos in store
any logo you need,we can do
Customized logo is OK ! Just need 20sets
Installation Instruction:
This transformer logo for car should be installed at the bottom of the door flame and make sure the Len vertical with the ground;1.Pull down the inside door board first. Mark the suitable location for drilling a hole;2.Drill the hole on the door board with our borer;3.Inset the product from the bottom of car door ,then arrange the power cord;4.Install the nut through the power cord upon the hole inside; Tighten the nut;5.Connect the power cord according to the installation guide;6.Adjust the lamp projection to the suitable place with wrench tool;7.Reinstall the inside door board,then check the final effect.
Hottest!!!12V 5W full color cree transformer logo for car