MHL to HDMI Adapter 1.Micro USB BM to HDMI AF MHL Adaptor Cable 2. RoHS, CE compliant 3.Compatible with Samsung Galaxy ,HTC
MHL to HDMI Adapter
1, Samsung original product
2, Micro-USB shaped MHL jack
3, Automatically switches the phone into USB data / charging or MHL audio / video modes
4, This official MHL adaptor for the Samsung Galaxy S II I9100 allows you to create an HDMI output via your handset's microUSB connection.
1, -Samsung Galaxy SII i9100
2, -Samsung Infuse 4G
3, -Samsung Hercules
4, -HTC EVO 3D
5, -HTC Sensation 4G G14
6, -HTC Flyer
7, -HTC EVO View 4G
Introduction and use:
MHL specification version 1.0 is an HD video and digital audio interface for connecting mobile phones and portable devices to HDTVs and other home entertainment products. It utilizes established connectors and features a single cable with a 5-pin interface, supports 1080p HD video and digital audio, and simultaneously provides power to the mobile device. It also enables the TV remote to control the mobile phone and access its contents
To connect your device, follow these steps:Connect one end of a universal HDMI cable into the MHL Adapter (1) and then connect the other end to the HDMI port on your TV (2).
Note: The Universal HDMI cable is not included with your device.Connect your Travel Charger to the MHL Adapter (3).
Warning!: Make sure that you use the Travel Charger that was included with your phone. If you use an unapproved travel charger, there is a possibility that the MHL adaptor might not function properly.Connect your Travel Charger to an approved power source (4). Connect the MHL Adapter connector into the Power/Accessory Interface port on your device (5). This is the same port that you normally use to connect your Travel Charger.
Note: Do not connect the MHL Adapter to your device through the Desktop dock. The Video and Audio output will not work correctly.
Note: Any incoming calls or messages will pause the media output. After taking the calls or acknowledging the messages, the media will resume playing.
Note: If your TV has multiple HDMI ports, you may use any of the ports but need to make sure your TV settings have the correct HDMI port selected. Consult your TV owner’s manual.
The TV screen will instantly display what is on your device home screen.
Note: After connecting the MHL Adapter, the upper and lower sides of the TV/Monitor’s screen may be cut off. In this case, you can adjust the TV/ Monitor in the Settings menu on your TV. Consult your TV owner’s manual.
Using your TV Remote for Media PlaybackYour device comes with RCP (Remote Control Protocol). With RCP, you can: Use the navigation keys on your TV remote to browse through your phone User Interface. Access Video conferencing, Gaming, Internet, etc. Use the TV remote media keys to control phone video while the phone is connected to your TV.
To connect to RCP, follow these steps:Connect your phone to the HDMI Port 1 on your TV if possible. For more information, refer to “Media Playback on HD TV” above. Set the following settings on your TV:
Note: Menu setting headings may differ depending on the brand of your TV.
Go to Menu/Tools > Settings/Input > Anynet+ (HDMI-CEC) > MHL Device (Setup) and set Anynet+ (HDMI-CEC) to ON.
Go to Menu/Tools > Settings/Input > Anynet+ (HDMI-CEC) > MHL Device (Setup) > Searching Connections.
After searching is complete, Anynet+ settings complete will be displayed.Press OK.
You are ready to use your TV remote to control your phone User Interface.
Note: When using your TV remote control with this application, there is a possibility that the remote may not work correctly if the TV is not made by SAMSUNG.
With RCP, you can use following keys on your TV remote control:
MHL Micro USB TO HDMI Adapter .(Apply to samsung ,HTC and Nokia mobile phones)