DC three phase silicon rectifier arc welder
1. Three-phase input, high power utilization.
2. Through combination to move.
3. May use 2.5-8mm any flux-coated welding rods, to weld low-carbon steel, carbon steel, alloy steel, as well as cast iron, stainless steel and so on, and may carry on the entire position welding.
4. May serve as the carbon arc air planer machine power source.
ITEM | ZX6-250 | ZX6-315 | ZX6-400 | ZX6-500 |
Input voltage(V) | 3-380 | 3-380 | 3-380 | 3-380 |
Frequency(HZ) | 50 | 50 | 50 | 50 |
Phase | Three phases | Three phases | Three phases | Three phases |
Current range(A) | 60-250 | 60-315 | 60-400 | 80-500 |
Rated input capacity(KVA) | 17.4 | 24.2 | 32.5 | 40 |
Current range(A) | 60-250 | 80-315 | 95-400 | 110-500 |
No-load voltage(V) | 38-66 | 38-73 | 40-76 | 40-76 |
Non-duty cycle(%) | 35 | 35 | 35 | 35 |
Usable electrodes(mm) | 2.5-5 | 3.2-5.8 | 3.2-7 | 3.2-8 |
Crust protection class | IP21S | IP21S | IP21S | IP21S |
Insulation class | F | F | F | F |
N.w/G.w(Copper)(KG) | 63/72 | 75/89 | 86/100 | 102/119 |
N.w/G.w(AL) | 60/68 | 71/85 | 80/94 | 95/112 |
Dimension(mm) | 550*380*670 | 580*420*730 | 580*420*730 | 620*470*800 |
ZX6 DC THREE PHASE SILICON RECTIFIER ARC WELDER
