Alu profiles: Delivery time: 15-20 days Mould charge: refund the charge when total quantity for each item adds up to 5 tons.
aluminium profiles for window doors making.
Profile | Building profiles | Industrial profiles |
State | 6060, 6061, 6063, 7005 | |
temper | T5, T6 | |
Colors | Silver white, champagne, simulated stainless steel, sand, bronze, black, blue, cream, etc. | |
Surface treatment | Mill finish, matted, sandblast, anodizing, electrophoretic coating, powder coating, thermal break, wooden grain | |
Hardness | 8-14HW | |
Mould | Based on your drawing or use our mould free | |
thickness | Minimum 0.7mm for profile; 10-20um for oxidation film; 80-120um for powder coat | |
Usages | Windows, doors, curtain wall, solar panel, LED panel, heat sink, etc. | |
Certified | ISO9001-2008, ISO14001, SONCAP, GB5237-2008( equals to BS, AAMA, JISH) | |
Primary Technical Data of Jinxiang Aluminum Profile
Chemical composition
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Impurity | Al |
6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.90 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
6061 | 0.4-0.8 | 0.70 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Rest |
6005 | 0.6-0.9 | 0.35 | <0.1 | <0.1 | 0.40-0.6 | <0.1 | <0.1 | <0.1 | <0.15 | Rest |
Mechanical property
Alloy | Condition | Tensile strength | Yield strength | Elongation | Vickers hardness |
6061 | T6 | >265Mpa | >245Mpa | >8% | |
6063 | T5 | >160Mpa | >110Mpa | >8% | HV>58 HW>8 |
T6 | >205Mpa | >180Mpa | >8% |
Colored anodized profile
Grade | Thickness of film | Hole scaling quality of oxide layer | |
Average thickness | Local thickness | P. Cr acid-erosion weight less method | |
AA10 | >10um | >8mm | <30 mg/d m2 |
AA15 | >15um | >12um | |
Electrophoretic coating profiles
Grade | Anodic oxide film | Thickness of paint film | Thickness of complex film | Film hardness | |
Average thickness | Local thickness | ||||
A | >10um | >8um | >12um | >21um | >3um |
B | >10um | >8um | >7um | >17um | >3um |
Powder coating & wooden-grained profile
Coating thickness | Coating impress rigidity | Adhesive force of coating layer |
40-120um | Indentation hardness>80 | 0 grade |
Thermal-break profile
type | Characteristic value of longitudinal shear strength Tc | Characteristic value of transverse strength Qc |
Inserting | >24N/mm | >24N/mm |
Pouring | >24N/mm | >24N/mm |
Packaging: fully interleave each panel with pearl cotton foam and wrap with shrink film exterior. Or according to your request.
Remark:
The dimensions can be customized.
Optimum design for different type,associated design parameter is provided.
OEM orders are welcomed
E-mail us now for further information.
aluminium window door making materials
