Welcome to ECBAY
400W Wind and Solar Hybrid Streetlamp for street
400W Wind and Solar Hybrid Streetlamp for street

Wind and Solar Hybrid Streetlamp 1. Wind and solar power supply 2. Higher security and reliability 3. Pass CE

Wind and Solar Hybrid Streetlamp

Wind and solar hybrid power generation system characteristic

1. System can gain stable power supply by use of wind and solar hybrid system,higher security and reliability.

2. Reduce the battery capacity in the condition of power supply.

3. Through suitable design and match, this wind and solar hybrid system can supply power independently.

System Configuration Analysis

Main configuration of the system: 1 piece of 70W/24V LED lamp,1 set of 400W/24V wind turbine,2 sets of 60W/12V solar panels,2 pieces of 12V/150AH batteries, 10 meter lamp tower and so on.

The electricity can satisfy 70W LED lamp 12 hours' illumination electricity demand in a day with the natural conditions of annual average wind speed at 4.0 m/s and annual average sunshine time in 2700 hours.As long as the natural condition of the installation location is the same with the above mentioned or better than that, the wind and solar hybrid system can generate enough electricity for daily demand of the street lamp. 2 pieces of 12V/150AH  batteries can satisfy electricity demand of the street lamp in three days at the condition of no wind and no sunshine(circuit and battery conversion efficiency has already been considered )

AH-400W Wind turbine technical parameter

AH-400w Technical Parameter

Rotor diameter (m)

1.15

Blade material and quantity

Reinforced fibber glass*8

Rated power / Max power (W)

400w/800w

Rated wind speed (m/s)

12

Rated rotating speed (rpm)

800

Working speed (m/s)

3-25

Start-up wind speed (m/s)

2

Survived wind speed (m/s)

50

Working voltage (V)

24V

Speed regulation method

Stall,electromagnetic damping

Generator style

Permanent magnet, three phase, AC

Wind turbine main body weight (kg)

30

 tower height  (m)

8~10

Suitable temperature

-30~+50°C

Environment humidity

90%

Noise level (decibel)dB

<60

Wind and solar hybrid controller technical parameter

Rated Battery Voltage

24V

Rated Wind Turbine Maximum Power

600W

Rated Wind Turbine Maximum Input Current

40A

Wind Turbine Maximum Input Power

1000W

Unload Voltage(factory default)

28V

Unload Current(factory default)

25A

PV Maximum Charge Current

10A

Unload Mode

PWM

Display

LCD

Display Parameters

Battery Voltage,Wind Turbine Voltage,PV Voltage,Wind Turbine Current,PV Current,Wind Turbine Power,PV Power,Under-voltage,short-circuit,Night.Etc

Range of working temperature &Humidity

-20~+55°C/35~85%RH(Without Condensation)

Protection Mode

Solar cells reverse charging,Solar cells anti-reverse,battery over charge,battery over-discharge,battery anti-reverse,over load,load short-circuit,lighting,wind turbine current limitting,wind turbine automatic brake and manual brake.

Battery technical parameter

Model

6-CNF-150

Rated voltage

12V

Rated capacity

150AH

Packaging dimension(mm)

482×170×240

Weight (kG)

48

400W Wind and Solar Hybrid Streetlamp for street

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.