Welcome to ECBAY
multi-head oil pump
multi-head oil pump

multi-head oil pump is manufactured according to German technology

GeneralThis product is manufactured according to German technology,Its performance of airproof is very good with small bulk and long life,It can be drove by motor directly connect to camshaft.It is 

suitable  for outwork.Linner diameter of sucker from auxiliarytank to gasoline pump must be enough big so that enough oil has been Supplied to gasoline pump to use.

Ensure to use dean oil.

Exhaust air in the gasoilne pump before use.

Adjusting must be rightly done according to method.

Supplying oil can be adjusted from the most to 1/3 of the most.Adjusting screw of multi-head oil ejector determine to amount of supplying oil.If rotate anticlockwise,amount of supplying oil will increase;On the contrary,if rotate clock wise,amount of supplyin oil will reduce.Multi—head oil ejector has been adjusted to full traveI by manufactuer.If you want to reduce amount of supplying oil,firstly you must open plug to adjust,screw rotate one circuit and wring four times,adjusting traveI of one dircuit is 1 mm.The most adjusting scope is 8mm.

performance and technical parameter 

Model

ZJN-10/250

ZJN-10/160

Medium applicable

 Mineral

Viscidity

16.5~4000cst

 Max.oil supply flux/turning

0.18ml

0.3ml

Importation rotating speed

900~1400 r/min

Transmissionization

148.1

Quantity

2-12

Safety

25MPa

16MPa

multi-head oil pump

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.