Product Details: Electrofusion of HDPE uses electrofusion fittings which have small copper wires coiled around the inside. Electric current is then run through those wires using an electrofusion processor in turn melting the HDPE on the inside of the fitting and the outside of the pipe. SUNPLAST company is able to provide wide range of electrofusion fittings available from DN20mm to DN630mm, including: equal coupler, reducer, equal tee, reducing tee, elbow 90°,elbow 45°.,etc.. Our HDPE electrofusion fittings are made by superior quality PE80 or PE100 raw material which is approved by PE100+ group, and they are mainly used for HDPE gas & water pipeline system. SUNPLAST HDPE electrofusion fittings can fully comply with EN12201-3, EN1555 & EN ISO 15494 standard. By comparing other HDPE pipe fittings (socket fusion fittings, butt fusion fittings.,etc.), HDPE electrofusion fittings have following advantages: ※ Inner diameter of the pipe remains same. ※ Equipment mobility(low weight/low cost), so can be moved around easily. ※ High performance. ※ User friendly, fully automated, so need of highly skilled operator not required. ※ No weakening of material strength.SUNPLAST has a lot of stock for normal sizes, can be delivered in a short time!! Product nameElectrofusion elbow 45°Sizes availableDN63-315mmSDR ratingsSDR11Material usedvirgin PE80 or PE100 raw materialColors availableNormal in black & yellow, or as per requestStandards follow toEN12201-3, EN1555, EN ISO 15494MarkingsCustomer's logo can be stampedSamples availableYes, sample available for small quantityPacking methodCartonsMOQNegotiableProduction lead timeDepending on the order quantity. Normally about 10-15 days for a 40hc container.Warranty time15 years for normal usingPayment termT/T or LC at sightFOB loading portNingbo or Shanghai ChinaPlace of originZhejiang, ChinaProduct Specifications: The HDPE electrofusion elbow 45°can be provided from DN63mm to DN315mm. The specific specifications as follows:Specification SDR11 SDR17 L63×45°√-L90×45°√-L110×45°√-L160×45°√-L200×45°√-L250×45°√-L315×45°√-Remark: "√" means available, "-" means unavailableWorkshop & manufacturing Facility SUNPLAST company has two manufacturing workshop located in Zhejiang province China, and the total area covers more than 10000㎡. The workshop is equipped with advanced production lines for HDPE pipes & injection machines for HDPE pipe fittings, such as Barton Heidfeld and Krauss-Maffei extruders, Haitian etc, which feature high production efficiency and great stability. With memory function & high automatic, they ensure the stable quality of pipes & fittings. Testing Equipment For all SUNPLAST HDPE pipes & HDPE pipe fittings, before shipment, they must pass very strict quality inspection & test, which is throughout the whole production process, from incoming material to finished goods packing. This ensure the pipes & fittings we provide to our customers are 100% qualified. Material All of HDPE pipe & HDPE pipe fittings are made by superior quality PE80 or PE100 raw material from famous suppliers in worldwide, such as Borealis, Sabic, Sinopec.etc. Loading & Shipment SUNPLAST HDPE pipe & fittings has been exporting to more than 30 countries & areas. Due to superior quality & the best service, we have built long & good business relationship with our customers, and they all satisfy about us all the time, some of our customers even have been working with us for more than 10 years. Question: ※ What’s the main difference between electrofusion & conventional heat fusion? A: The main difference between conventional heat fusion and electrofusion is the method by which the heat is applied. In conventional heat fusion (butt, saddle and socket) joining, a heating tool is used to heat the pipe and fitting surfaces. The electrofusion joint is heated internally, either by a conductor at the interface of the joint or by a conductive polymer. Heat is created as an electric current is applied to the conductive material in the fitting. PE pipe to pipe connections made using the electrofusion process require the use of electrofusion couplings.※ What does "electrofusion" mean? A: Electrofusion is a method of joining HDPE pipes using special fittings that have built-in electric heating elements which are used to weld the joint together.The pipes to be joined are cleaned, inserted into the electrofusion fitting and a voltage (typically 40V) is applied for a fixed time depending on the fitting in use. The built in heater coils then melt the inside of the fitting and the outside of the pipe wall, which weld together producing a very strong homogeneous joint. The assembly is then left to cool for a specified time.※ What pressure rating can SUNPLAST provide for HDPE electrofusion fittings? A: SUNPLAST HDPE electrofusion fittings be provided in SDR11, with pressure rating of PN12.5bars (for water) & PN4 bars (for gas) for PE80 fittings, PE16bars (for water) & PN10bars (for gas) for PE100 fittings. ※ How can electrofusion elbow 45°be used for? A: HDPE electrofusion elbow 45°/HDPE electrofusion bend 45°is mainly used for the connection of the HDPE pipeline to bend at 45°welded by electrofusion welding machine.Why choose us? ※ More than 15 years’rich experience in manufacturing, we are an expert in this industry. ※ Complete fittings & welding machines to support the connection of pipes ※ Strong after-sale term supports to provide professional guide for installation ※ By using top quality raw material, with long warranty time on quality. ※ Short lead time to satisfy your urgent need request. ※ Quick reply for your enquiries within 12 hours. ※ OEM service available to support a good sale in customers’market.Contact us Contact us freely for any inquiries on our products by following: Email: [email protected] [email protected] Telephone: 0086-574-87226883 Fax: 0086-574-87467583 Mob: 0086-1596849305324 hours on line contact: whatsApp: 0086-15968493053 Skype: polypipe-manufacturer
