HiOSO Technology Co.,Ltd is one of the leading 1fe + 2fx node type media converter manufacturers, equipped with productive factory, welcome to buy and wholesale 1fe 100m + 2 fiber 100m node type media converter, 1rj45 100m + 2 sc 100m node type media converter, 1fe + 2fx cascaded media converter products from us. Overview HiOSO FC650E is a kind of 10/100Mbps adaptive fast Ethernet node type fiber media converter, with 1 10/100Mbps adaptive switch, which can implement mutual conversion between 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal. FC650F can extend the transmission distance of a network from 100m over copper wires to 120Km. This type of fiber converter supports two different types of network connection media types: 10/100Base-TX and 100Base-FX. With the application of the switching technology and the storing & forwarding technology, this kind of converter supports transmission in dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode fibers. Features Adaptive 10Mbps and 100Mbps environments, for the convenience of network upgrade; Efficient built-in switching core, to implement flow control and reduce broadcast packets; Provide electrical interfaces based on VLAN switch setting, and supporting the connection of users from different units; Support full-duplex and half duplex transmission modes and capable of automatic negotiation; Support automatic crossing of twisted pair ports, for the convenience of system debugging and installation; Support the transmission of extra-long packets (with the maximum length of 1552 bytes); Support Quality of Service (QoS) and ensuring transmission of VoIP packets; Support Spanning Tree Protocol (STP) to form a redundant network; Low power consumption, low heat and capable of stable operation for a long period of time; Support multiple types of fiber ports such as dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users; Application 10/100Mbps fast Ethernet long-distance transmission network Technical Specifications Parameter Specifications Access mode 10/100Mbps Standard IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree Wavelength 850nm/1310nm/1550nm Transmission distance Dual-fiber multi-mode: 2Km; Dual-fiber single-mode: 25/40/60/80/100/120Km; Single-fiber single-mode: 25/40/60/80/100KmCategory-5 twisted pair: 100m Port 1 RJ45 connector, connected to STP/UTP category-5 twisted pairTwo fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125μm)Single mode - SC/FC fiber port (fiber size: 9/125μm)Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125μm) Conversion mode Medium conversion, storing and forwarding mode MAC address table I K Buffer space 1Mbit Flow control Full duplex state: flow control; half duplex state: back pressure mode Delay 9.6us Bit error rate <1/1000000000 MTBF 100,000 hours LED POWER (power), FX LINK/ACT (fiber connection/action)FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M)TP1/2/3 LINK/ACT (1/2/3-port twisted pairs connection action)TP1/2/3100 (1/2/3-port twisted pairs, with a transmission rate of 100M) Power DC5V/1A (external) Power consumption 3.5W Operating temperature -10~55℃ Operating humidity 5%~90% Storage temperature -40~70℃ Storage humidity 5%~90% (non-condensing) Dimensions 26mm(Height)*70mm(Width)*98mm(Depth) (external power) Order Information Model Rate (Mbps) Mode Working Wavelength (nm) Transmission Distance (Km) Fiber Interface Power FC650EM2-SC/ST 10/100 Dual-fiber multi-mode 1310 2 SC/ST External DC5V/1A FC650ES20/40/60 -SC/FC 10/100 Dual-fiber single-mode 1310 25/40/60 SC/FC External DC5V/1A FC650ES80/100/120-SC/FC 10/100 Dual-fiber single-mode 1550 80/100/120 SC/FC External DC5V/1A FC650FS-S20/40/60-SC 10/100 Single-fiber single-mode 1310/1550 25/40/60 SC External DC5V/1A FC650ES-S80/100-SC 10/100 Single-fiber single-mode 1310/1550 80/100 SC External DC5V/1A
