Perforated base pins1,The Self Stick Insulation Anchor, or Stick-Up Hanger, is a fabricated 2" X 2" metal base with Self Stick adhering double-sided tape on the reverse, or installation side of the anchor base. 2,An insulation pin is pre-attached for impaling and installing various thermal and acoustical insulation materials. Popular materials are Mild Steel, Aluminum and Stainless Steel, with combinations of these materials also occurring for special applications. 3,Typical insulation pin diameter is 12 gauge (0.105" dia.), while other diameters are available. This insulation anchor and is used in conjunction with Self Locking Insulation Washers, or Speed Clips, the length is 1", 1-5/8", 2", 2-1/2", 3", 3-1/2", 4", 4-1/2", 5", 5-1/2", 6", 6-1/2" . 1,Insulation pin, Aluminum insulation pin, Self-adhesive insulation pin Self-adhesive insulation pin is exclusively used for fixing adiabatic materials in ducts of air-conditioner, for glass-wool and rock-wool in soundproofing works,and for the duct-lining.2,Usage:Exclusively used for fixing adiabatic materials in ducts of air-conditioner, for glass-wool and rock-wool in soundproofing works, and for the duct-lining3,Pin cover:Protect people hand from being injured when putting insulation. 4,Recommended assembly method:1.Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.2.Remove the protective release paper taking care not to touch the adhesive.3.Place the hanger in the required position and press the base against the surface to be insulated4.Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of adherence is achieved after 24 hours
