Carbon steel/Alloy steel/Stainless steel Seamless and welded PIPE CROSS As a type of fittings, pipe cross is usually installed at the intersection point of four pipelines. Common cross can be divided into straight type and reducing type. Most crosses on current market are made through welding two tees together and rubbing off the welding joint. However, this type of cross can't be used on pressure pipes.Our crosses are produced by one-time forming, which perfectly solves the problem out. In order to accommodate different customers' requirements, we provide crosses made of different kinds of steel. In addition, our cross features superior quality, great contractility, high corrosion resistance and precise size. Further, our production process is upgraded and the processing time gets significantly reduced because we have cutting-edge techniques and advanced equipment. As a result, better product quality and lower cost can be achieved. Pipe Tee Standard: GB/T12459-2005, GB/T13401-2005 SY/T0510-1998 ASME B16.9-2007, ASME B16.25-2007 CSA Z245.11-05-2005 Available sizes range we can produce: Reducing cross and Straight crossDIMENSIONSSEAMLESS TEEWELDED/SEAMED TEEOUTER DIAMETER1/2"~24"6"~60"NOMINAL DIAMETER15MM~600MM150MM~1500MMWALL THICKNESS4MM~200MMPipe Tee Material : Carbon steel: ASTM/ASME A234 WPB - WPC Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911 Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6 High-performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70
