SPECIFICATON This product can be used as LED emergency light power supplyInstalled in the LED ceiling light.External power supply indicate, charging state indicate, fault light indicate, out going line installationExternal testing button, which can check the working state of equipment at any timeThis product can be fit for installation with infrared body sensor switch and smart radar switch etc., which easily achieve combining with smart sensor lighting and emergency lighting.FEATURESSetup different emergency power, voltage, current and working time based on the LED There is high-energy battery inside; the working temperature range is wide.External LED driving power supply, which associated with switch used for normal lighting (not emergency mode)Easy for installation, long emergency time, safe and reliability Automatically testing mode, one time short test every week, one time capacity test every 6 monthsProtection of battery polarity reversal and deep dischargeOpen-circuit fault of LED light indicationCharging state indicateExternal power supply indicateOptional manual experiment switchMaterial of enclosure is PCTECHNICAL SPEC.Rated power voltage: 90V-280VRated frequency: 50Hz, 60HzStand-by consumption: ≤0.5WPower factor: ≥0.87-0.95Over-voltage protection: 320VPower of emergency LED：3W/6WDischarge time ≥9 hours (3W)/4.5 hours (6W)LED forward voltage range: 18-46vOutput current (constant current): 300mA/100mA (adjustable)Battery's spec. 4400mAh,7.2VCharging time ≤24 hoursWorking life: not less then 5 years (except battery)Size of the appearance (mm): emergency control box 150*40*30, battery 150*38*20 WORKING ENVOIRENMENT:Working temperature: -20℃~55℃Max temperature of enclosure≤70℃Limit working temperature: -25℃~60℃Protection class: IP 20Store and ship temperature: -30℃~70℃Relative humidity:：=<95%Atmospherie pressure：63kPa~106.0kPa
