Specifications – AOZ ANCHOR SYSTEMProduct NameM10 M12 steel galvanized zinc plated chemical anchor boltsMaterialSteel galvanizedSizeM10,Website:http://www.ourschina.com,M12, 100,150,200mmStandard ModelDIN,ASTM,JIS,BS,AISI,NonstandardFinishZinc Plate or yellowCertificateCE,ISO9001,SGSMin Order2000pcsPacking Listin cartons and then on palletDelivery TermFOB/C&F/CIFDelivery Lead TimeWithin 20days after the order is confirmedPayment Term30% by T/T as Downpayment,the balance against the copy of B/L;L/C at sightM10 M12 steel galvanized zinc plated chemical anchor bolts: Chemical or resin anchors are generic terms relating to steel studs, bolts and anchorages which are bonded into a substrate, usually masonry and concrete, using a resin based adhesive system. Ideally suited for high load applications, in virtually all cases the resulting bond is stronger than the base material itself and as the system is based on chemical adhesion, no load stress is imparted to the base material as with expansion type anchors and are therefore ideal for close to edge fixing, reduced center and group anchoring and use in concrete of unknown quality or low compressive strength. Although there are many differing variations and delivery systems in the market, all systems operate using the same basic principle with the base resin, requiring the introduction, by mixing, of a second component to begin the chemical curing process, hence the term chemical anchor It is often difficult for someone new to resin anchors to understand the difference between the array of resins available. For those who specify anchors it is also important to understand this difference to ensure any specification changes are to truly equivalent products.●Unsaturated Polyester●Epoxy acrylate also know as Vinyl ester●Pure epoxy●Hybrid systems
