HX-WIFI-V03WIFI-LED Controller with RF button remoteWIFI-V03 controller appeared with the installation of controlling software on mobile devices with Android or IOS system,Website:http://www.hoionlighting.com, such as android phone, Iphone, tablet PCs, they can remote control LED lighting products through Wi-Fi, which makes LED control more intelligent and humanization. One WIFI-V01 controller can be used as dimmer, CT controller, and RGB controller, only need to select the right control interface in the software. In addition, this model has DIY function. Users can get any effect they want based on our controlling software. If you don't have any mobile devices with the controlling software at hand, you could also use our RF remote control to control it. This model designed for constant voltage led products, such as led strip, led modules. For controlling more led products, amplifier is available.Features ●Support both Wi-Fi control of Apple products (iPod, iPad, Iphone), Android mobile devices like Samsung, HTC, and RF14keys wireless remote control. ●With the 3-in-1(Dimming, CT, RGB) apple/android software. One device suit to different lighting application scene.●Memory function to save scenes anytime anywhere for next play.●WIFI-V01 is designed for constant voltage led products, working voltage auto fit to DC12-24V.●Wi-Fi control based on 2.4GHZ frequency, RF remote control based on 433.92MHz. ●2 year warranty.Technical parameters1.ControllerWorking temperature-20-60℃Working voltageDC12~24VPower consumption<3WConnect methodCommon anodeWIFI brightness level100WIFI speed level100brightness level32speed level100N.W.150gG.W.230gCase dimensionL108*W63*H28mmBox dimensionL109*W55*H56mmOutput3 channelsOutput current≤4A(each channel)WIFI frequency2.4GRF frequency433.92MhzOutput gray scale256Memory functionsupportReceiving sensitivity802.11b:DSSS(-5dBm) 802.11b:CCK(-10dBm) 802.11g:OFDM(-15dBm)Output power12V: ≤144W(3CH) 24V: ≤288W(3CH) 2.RF remote controlWorking temperature-20℃~60℃Supply voltageDC3V(AAA*2)Standby current<18uAWorking current<25mAStandby power54uWWorking power75mWNet weight65gRF frequency433.92MHzExternal dimensionL150*W40*H20 mmRF distance≤20m3.SoftwareNameFreeColor V2.0PlatformAndroid 2.1 or above, IOS4.3 or above, with wifi functionSizeAndroid(661KB) , IOS(1.4MB)CategoryCommunicationLanguageEnglish Using illustrationFreeColor V2.0 installation:FreeColor V2.0 software Using illustration:1. making the WIFI-V01 properly connected, and then turn on the power;Step 1: find the WIFI network named "HX001" (factory default name) on the phone, and connect it.Step 2: open the application "Freecolor" on the phone, you will see the application enter the "device list" interface and search the device automatically. If the device is not show in the search result list, click on the upper right to re-search.Step 3: Find out the device from the search result list, and click the round icon to go into the main control interface.("FreeColor" is 3-in-1 (Dimmer, CT, RGB) software. The round icon contains 3 versions for RGB/CCT/DIM, will show RGB version as default, click “Driver” to change to CCT/DIM if needed.)2. The main control interface for RGB/CCT/DIM as below:3、Application functions. (Using RGB interface as example, CCT/DIM are same)1)、RGB control interfaceNO.ButtonFunction1ON/OFFTurn on/off the light2Color boardSelect any static color mode from the board.3Brightness slipSlip to adjust the current light brightness, 100 levels in total.4Color shortcut keyQuickly to select 6 kinds of common color5System settingEnter to the “Device list”, set the WIFI connection and select the application scene (RGB/CCT/DIM).6DIY memory functionGo to DIY modes select page. Display the saved DIY modes7Dynamic modesGo to select the dynamic modes.(fade, jump effects)8RGB seven color boardDisplay RGB seven color board9Color valueDisplay the R/G/B gray value, “L”: the current brightness level.10DIY mode saving keyAfter DIY, click this key to save. Save any color which you like2)Dynamic mode interfaceMODE:select the different dynamic mode, such as flash, fade and etc;SPEED:select the speed level of the dynamic mode,100 levels in total;EFFECT:select the different effect based on the different mode. 3)、DIY modes manage interface:This page displays all of the DIY modes which have been saved, up to 12 modes in total.If you need to save the changes you like, you can click the DIY storage key to save and name, then click the DIY memory function, you can select the storage modes.4. Join to the home network and SSID setting1)join to the home networkStep 1: Before setting the joining to the home network, connect the phone with the WIFI controller directly as the instruction above.Step 2: Enter into "Device list" interface after the Step 1; and click "Network" on the right go into setting interface for joining the home network (Figure 1 below).Step 3: Open "Connect to existing LAN" (Figure 2 below), the application will search LAN automatically.Step 4: Click the LAN which you want to join in(Figure 3 below), will pop up "Enter the SSID password" dialog box, enter your home LAN password and press "OK" to confirm(Figure 4 below). There will show "change wifi success and search again" after success connection(Figure 5 below).Step 5: The application will back to "Device list" interface automatically after Step 4. Click on the upper right to re-search, will find the device which have been connected to home LAN well. Click the round icon start to control your light through your home LAN.2) Resetting SSID username and passwordIf more than one WIFI-V01 in close area, we can reset the SSID for the devices in order to avoid they jamming each other. Enter "Device List" interface,click and enter "Network" interface,then click "Change SSID and password" will pop up "User setting" page, key in the SSID name and password, click "apply" to finish and save(The available SSID name are 16 in total, HX001,HX002……HX016). Re-link the device after success setting.Controller operation illustration1. Connector illustrationFor Dimming: CH1→V-、CH2→V-、CH2→V-、V+→V+;For CT: CH2→WW、CH1→WC、V+→COM;For RGB: CH3→B、CH2→G、CH1→R、V+→COM.2. Working state instructionIndicator lightFunction tablePowerPower indicator light, long-time bright shows power supply is working normallyWifiLong-time bright in normally connection, when receives wifi signal data flicker.RFFlickering when receives correct control signal from wifi device or RF remote control; and die out in free time.RESET key:Press and hold at least 5 seconds, WIFI previously set data will be cleared to return to the factory default.3.Controller connection(1) RGB connection::connect CH3→B、CH2→G、CH1→R、V+→COM;(2)CT Connection:Connect CH2→WC、CH1→WW、V+→COM;(3)Dimming connection:connect CH1→V-、CH2→V-、CH2→V-、V+→V+;4.RGB remote control operation illustrationAdopt RF remote technology, 14 buttons in total. 1) The function of buttons for RGB as below: Name of keyFunction descriptiononTurn on the controller outputoffTurn off the controller outputDynamic mode+For dynamic mode selection(9-17), each time pressing dynamic mode +1Dynamic mode-For dynamic mode selection(9-17), each time pressing dynamic mode -1Static mode+For static color selection(1-7), each time pressing static mode+1Static mode-For static color selection(1-7), each time pressing static mode-1White colorWhite color hot key(mode 8)100% brightnesspress this key goes to 100% brightness for the present colorBrightness+Each time pressing brightness +1, 256 levels in total, long-pressing can get fast adjustmentBrightness-Each time pressing brightness -1, 256 levels in total, long-pressing can get fast adjustmentSpeed+Each time pressing speed +1, 100 levels in total, long-pressing can get fast adjustmentSpeed-Each time pressing speed -1, 100 levels in total, long-pressing can get fast adjustmentAutomatic cycleAll dynamic modes are automatically circulating in orderStandard color changes as follows: NoPatternsRemarks1Static redBrightness is adjustable, speed is unadjustable2Static green3Static blue4Static orange5Static yellow6Static purple7Static cyan8Static white9White flashSpeed / brightness are adjustable10White breatheSpeed is adjustable, brightness is unadjustable113 color jumpySpeed / brightness are adjustable127 color jumpy133 color fadeSpeed is adjustable, brightness is unadjustable147 color fade15R/G cross fade16R/B cross fade17G/B cross fade189-17Autonamic cycle2) The function of buttons for CCT as below: NameDescriptionSet buttonFor setting the night light and matching code with receiver. Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting. Press the set button again to save the setting and quit out.ONTurn onOFFTurn offBrightness +The brightness will add 1 level after each time press. Long-press can get fast adjusting.Brightness -The brightness will reduce 1 level after each time press. Long-press can get fast adjusting.CW balance keyBalance to cool white. Long-press can get fast adjusting.WW balance keyBalance to warm white. Long-press can get fast adjusting.ModeHot key for 3 CCT full-light: 100% CW, 100% WW, 100%CW+100%WW, and 4 dynamic modes.Night lightPress the button go to night light mode(night light Setting:Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting, press the left button to down the brightness, press the right button to up the brightness. Adjustable range: 1%-10%.) Speed +Add the speed of dynamic mode. Long-press can get fast adjusting.Speed -Reduce the speed of dynamic mode. Long-press can get fast adjusting.Delay buttonThe light will be delay off in 30 seconds.3) The function of buttons for RGB as below: NameDescriptionSet buttonFor setting the night light and matching code with receiver. Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting. Press the set button again to save the setting and quit out.ONTurn onOFFTurn offBrightness +The brightness will add 1 level after each time press. Long-press can get fast adjusting.Brightness -The brightness will reduce 1 level after each time press. Long-press can get fast adjusting.Hot brightness key +4 levels brightness (10%、30%、70%、100% ) hot selection key, lights will go to next one after each pressing.Hot brightness key -4 levels brightness (10%、30%、70%、100% ) hot selection key, lights will go to last one after each pressing.Mode key3 modes in total: 100% static, flash, breatheNight lightPress the button go to night light mode(night light Setting:Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting, press the left button to down the brightness, press the right button to up the brightness. Adjustable range: 1%-10%.) Speed +Add the speed of dynamic mode. Long-press can get fast adjusting.Speed -Reduce the speed of dynamic mode. Long-press can get fast adjusting.Delay buttonThe light will be delay off in 30 seconds. Tips: Receiver can be controlled by any one the same remote as factory default; RF BT remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.Matching code operationIf unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:1. Step 1: Pressing key "set" and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.2. Step 2: Continuously to press the key "Mode key" for 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.3. Code learning successfully, the LEDs will be back to the status before the power off, and the receiver only can be control by the remote.4. If not, please re-operate from step 1 to 2.Clear code operationBack to factory default, wall-panel can be controlled by any one the same remote control.1. Step 1: Pressing key "set" and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.2. Step 2: Continuously to press "Delay button" 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.3. Code clearing successfully, the LEDs will be back to the status before the power off, and the receiver can be controlled by any remote control(any one the same remote control can be used to clear the code).4. If not, please re-operate from step 1 to 2.Product information for placing orderProduct nameItem numberWIFI-LED ControllerHX-WIFI-V03