KPSG-2 Semi Automatic Adhesive Glue Filling Caping MachineI.Introduction of KPSG-2The machine is a newly designed adhesive machine for adhesive factory ,Website:http://www.kingpack-cn.com,which mainly used for of super glues in plastic bottle packing. It applies self-suck device to inhale material and begin filling. The caps are put on by a electromagnetism shaking tray. A specialized motor is used to screw caps which ensures a suitable screwing thickness. There are 16 bottle stations to finish all functions during rotary. When the bottles are put manually, the machine finishes glue filling, cap putting, cap screwing and bottle exit automatically. Therefore, it is very popular among the chemical and glue industries.II.Working process of KPSG-2Step 1. One operator puts the bottle into the mould seatStep 2. The machine will fill glue into the bottle automaticallyStep 3. The machine puts the inner cap on the bottleStep 4. The machine will screw the inner caps automaticallyStep 5. Finishing cap screwing, the bottle exit from seat automaticallyStep 6. Another operator press the external cap on the bottle.III.Features and Performance of KPSG-21.The machine structure is fully mechanical which ensures a high working speed and steady operation, reducing the failure rate greatly.2.PLC controller. The operation system is more steady3.A vibrating disk is applied to deliver the caps in order. 4.Specialized motor is used for cap screwing. The thickness is set properly5.The production capacity can be realized and controlled automatically. 6.Speed shall be adjustable by converter and normal speed is around 40pcs/min7.High quality stainless steel panel8.Human-machine interface with direct display and control.9.The automatic mark detecting the bottles. It will fill when detecting the bottle, if no bottle, the material will not flow. 10.Before bottle exit station, there is another detector. When it checked the the cap screwing is finished, the bottle will exit automatically. If the cap-on and cap screwing fails, the machine will stop as a signal to prevent a waste of material and sprinkle.11.High-viscous material will have a hopper system.(optional).12.Touch screen panel (optional)IV.Technical ParameterModelKPSG-2Power Supply 220V/50Hz/single phasePower Rate1.5KWAir pressure 0.2-0.4MPaFilling Range 20g, 50g, 100gFilling Precision ≤±1℅Filling capacity30-45pcs/minBottle diameterΦ2-15(mm)
