Product Description HX-SZ600-WP-RGB,Website:http://www.hoionlighting.com, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for RGB led strip. Adopt full touch RF wall panel remote control. 5 function buttons and 1 color ring in the center, all buttons are in touch form, the color ring has 64 levels in different color value. Further, there are 9 dynamic modes in the mode button, and the speed is adjustable. Particularly, the wall panel adopts RF wireless technology, and the working voltage is AC90-265V, easy and convenient to install.Especially, HX-SZ600-WP-RGB designed with Synchronization function. It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips.Technical ParametersReceiver: Working temperature-20-60℃Supply voltageDC12V~24V0utput3 channelsConnecting modecommon anodeExternal dimensionL91*W88*H24 mmPacking sizeL106*W106*H66 mmNet weight190gGross weight220gOutput gray256 levelsOutput current＜8A(each channel)Output power12V:＜288W,24V:＜576 WFrequency of RF remote control433.9MHzRF Wall panel remote control:●Working voltage：AC90-265V(50/60Hz)●RF signal frequency：433.92MHz●Transmission distance：up to 30m（the deviation depend on the environment）●Working power：<2W●Standby power：<0.2W●Ambient temperature：0-45℃●Dimension：86*86*40mm●Packing dimension: L89*W40*H89mm●N.W.:130g●G.W: 140gExternal Dimension Interface Specifications Direction for use This product adopts RF full touch control, with one dimming ring and 5 function buttons.The function of each button as below: Name of keyInstructionRemarksON/OFFON or OFF in any timePausePause or ContinueModeThe mode will move to next, when touch the key each time9 modes in total.Speed/Brightness +The Speed/Brightness will +1, whentouch the key each timeSpeed for dynamic modes, Brightness for static modes.Speed/Brightness -The Speed/Brightness will -1, when touch the key each timeSpeed for dynamic modes, Brightness for static modes.Color RingTouch any color which is wanted9 modes in total as below: NoPatternsRemarks1Static worm whiteBrightness is adjustable, speed is unadjustable2Static cool white3White breathSpeed is adjustable, brightness is unadjustable4Seven-color jumpy changing5Seven-color smooth6Seven-color fade7R/B crossfade8B/G crossfade9G/R cross fadeImportant: As RF signal sender, set up the LED Touch faceplate to a RF led driver (RF receiver) before use.1.Press and hold the "Mode" key before the "RF LED Driver" powering on, the RF signal light lights red.2.Power up the "RF LED Driver", and the LEDs will output 50% brightness （Tip: if the output does not output 50% brightness， indicating that the code learning is not successful, need to repeat the step 1）.3.Press the "ON" key, then the LEDs will be 25% brightness.4.Press the "Mode" key again, then the LEDs will be 5% brightness.5.Press the "ON" key again，then the LEDs will be 100% brightness，and indicating the successful code learning. If not, repeat from step 1.Installation Method1)Opening: Gently pry gaps in touch panel with a screwdriver, and remove the panel slowly, as shown below: 2）Unplug the connector, connect the power cord, and fix the base part in the 86*86 installation box ( user need to prepare the installation box by themselves) on the wall with screws.3）Reconnect the two parts of panel, and cover the face part on the base part to complete the installation.Typical ApplicationsApplication Circuit 1:Application Circuit 2: （Synchronization function with network Line(RJ45) ）Notes 1. Supply voltage of this product is DC12V~24V, never connect to others or AC220V. 2. Lead wire should be connected correctly according to grade that connecting diagram offers.3. This product is not to overload;4. Warranty of this product is one year, but exclude the artificial situation of damaged or overload working.Common Problems ProblemsPossible causeSolutionLamp does not light after powerPower cord is not properly connected, or there is not output switching power supplyConnect the power cord properly or replay the powerLamp power cord is not connected or short circuitConnected lighting power cord2. After connecting some of the load the controller does not workThe connected load is too large，so that it has burned in some of the components of the controllerReplace parts of components or replace the controller
