RCM-A are appicable for cooling moulds to reduce products molding cycle,also they are available in the cooling of equipments in order to maintain a normal temperature.Besides,they are suitable for other industries with the need of cooling
Good features:
1. Cooling temperature range 5-35 ℃.
2. High-capacity tube-in-shell evaporator with very good heat exchange performance especially under high ambient temperature condition.
3. Tube-fin double condensers with excellent heat transfer and rapid cooling.
4. Stainless steel warm-keeping tank.
5. R22 refrigerant to be used for efficient cooling.
6. R407 environment-friendly refrigerant is optional to use.
7. Overload protection for compressor, pump and blower.
8. Independent temperature controller, anti-freeze protection.
9. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
10. Warm-keeping design for all piping to avoid partial convection.
11. Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonic.
RCM-3A
RCM-4A
RCM-5A
RCM-8A
RCM-10A
RCM-12.5A
RCM-15A
RCM-20A
RCM-25A
RCM-30A
Chilling capacity
kw
7.5
10
13.5
20
25.5
31.5
38.5
50
62.5
77.5
Kcal/hr
6500
9000
11500
16500
22000
27000
33000
44000
54000
66500
Compressor output power
HP
3
4
5
8
10
12.5
15
20
25
30
Refrigerant
-
R22 R407C
Evaporator
-
Plate type
Blower power
Kw
0.25
0.19*2
0.25*2
0.25*4
0.42*6
Tank capacity
L
50
65
110
150
270
350
400
Pumping Power
Kw
0.75
1.1
2.2
2.2
Pump Max flowrate
L/min
80
150
250
400
Pump Max pressure
kg/cm2
2.0
Pipe size outlet
lnch
1"*1
1½"
2"
2½"
Pipe size intlet
lnch
1"*1
1½"
2"
2½"
Drainage outlet
lnch
1/2"
Overflow Port
lnch
1/2"
Weight
Kg
120
140
180
220
280
350
400
450
550
600
Extemal size mm
L
1090
1090
1250
1350
1350
1700
1700
1900
2150
2150
W
760
760
760
860
96
1200
1200
1200
1480
1480
H
1250
1250
1320
1560
1620
1750
1750
1750
1800
1800
Plesase excuse for not note if some specifications of products are changed
Note: 1) The cooling capacity is measured when the outgoing water temperature is 12oC and ambient temperature is 30oC.
2) The refrigerant can use R407.For coding,use "N".For example,RCM-10A-N.
3) The stardard voltage is 3¢,380V,50Hz. We also can make it as your requirments.
