1.Fine compressive property,stretch proof 2.Fine aging ,water ,weather resistance 3.Non corrosiveness 4..No liquid droppin
product name: high strength epoxy adhesive joints
Application:
1.The dry bonding of hanging parts fpr internal or external stone wall;
2.The reinforcement or bonding for the precast concrete form or structural strengthening;
3.Bonding or pattern making for tiles and marle;
4.Joint for tiles and brick or tiles and concrete;
5.Fissure filling for concrete;
6.Anchor adhesive;
7.Not available for smooth surface;
8.Not available for stone surface finished care ptocessing;
9.Not available for working in water or oil surface.
Main Properties:
1.Modified epoxy resin polymer with fine aging resistance,high mechanical strength;
2.Solidified adhesive with fine water resistance, humidity resistance, chemical resistance and weather resistance(-10~90°c);
3.High thickness adhesive with no liquid dropping and utilization ratio reaching up to 95%;
4.Fine earthquake-resistance;compressive property,stretch proof, impact resistance;
5.Non corrosiveness;no injury to human body, if inadvertent to be stained, wash with soapy water;
6.Clean operating environment; low construction cpst; reducing process and cutting expenses down of lime sand transport and silt displacement;
7.Inflammable; safety and non-toxic.
Typical Physical Porperties
Part A
| Resin type | Exoxy resin |
| Aspect | Gel in white color |
| Viscosity(25) | 10,000-30,000.P |
| Density | 1.5-1.6/m3 |
| Storing time(10-25) | 12months keep in cool place |
| Dangerous decomposition | Usually none |
| Garbage discharge | Based of national and laws, local provisions |
Part B
| Main ingredient | Organic modified amine |
| Aspect | Gel in cream color |
| Viscosity(25) | 10,000-30,000.P |
| Density | 1.5-1.6/m3 |
| Storing time(10-25) | 12 months keep in cool place |
| Dangerous decomposition | Usually none |
| Garbage discharge | Based of national and laws, local provisions |
Technical data:
| Characters | Standard index | Tested data | Test method |
| Working time(25)min | 5-30 | 15 | GB/T12954-1991 |
| Working temperature/ | -10-40 | -10-40 | GB/T12954-1991 |
| Using temperature/ | -45-90 | -45-90 | GB/T12954-1991 |
| Impulsion intensity of KG/m²> | 3.0 | 4.5 | GB/T2571-1995 |
| Shear Strength Mpa> | 8.0 | 18.0 | GB/T7124-1996 |
| Impress strength Mpa>(stone-stone) | 10.0 | 17.0 | JC 887-2001 |
| Impress strength Mpa>(stone-steel) | 10.0 | 17.5 | JC 887-2001 |
Attention:
1.Make the surface to be bonded rough if it is smooth;
2.Operation temperature -10°c~45°c;
3.Do not move the bonding parts until it solidifies completely;
4.Heat the adhesive to 30~40°c if used in winter
5.Do not operate with it in the wet place;
6.Effective operational time of the mixed adhesive is 15 minutes;
7.Do not reload the excess adhesive back to the original packing;
8.Clean the tools immediately with acetone after use;
9.Keep away from children and do not swallow;
10.12 months valid if stored in ventilative place,could still be used if retest shows to be qualified;
11.Refer to the application guide on the package before use.
Instruction:
1.Surface pretreatment:Clean surface to be bonded away from laitance,dirt,loose mortar,oil,etc;
2.Mix A with B according to the ratio 1:1 and stir them intensively until the mixture uniformed color achieved;
3.Paint the surface to be bonded evenly with steel scraper or other tools like this.
high strength epoxy adhesive joints
