1.Meterial:Polyurethane,modified epoxy acrylate 2.Size:3.5kg/can,4kg/can 3.Fine water,acid,alkali,aging,heat, fire resistance
Product Name: bridge strengthening anchor adhesive
Application:
Concrete iron or anchor fixing adhesive for construction joint,road widening, bridge strengthening,reservoir strengthening and renovation of old buildings,etc.
Main properties:
1.Double components adhesive;
2.Environment friendly without styrene;
3.Water resistance,free-thaw resistance,acid and alkali resistance,aging resistance,heat resistance and fire resistance;
4.Low sensitivity to humidity;
5.Fine affinity for cincrete equal to effectiveness of embedded parts.
Attention:
1.Continous operation recommended to avoid waste;
2.Do not operate in wet place;
3.Make sure the holes are clean during operating;
4.The operating temperature should be between-10°c~40°c;
5.The recommended dosage of the adhesive is 2/3 volume of the hole or fill the hole up;
6.Fill the hole from the bottom of the hole to avoid bubbles;
7.12 months valid if stord in ventilative place;
8.Clean the tools immediately with acetone after use;
9.Refer to the application direction on the package before use.
4L(4kg)plus 110g hardener | 18L(20kg)/Drum plus 1L(600g) |
4sets/ctn | hardener |
bridge strengthening anchor adhesive