1 High strength, low viscosity, Loctite 272 Thread Locker 277 Anaerobic Adhesive 271 2 For permanent locking and sealing, faste
JH222 Threadlocking Adhesive
1 High strength, low viscosity, Loctite 272 Thread Locker 277 Anaerobic Adhesive 2712 For permanent locking and sealing, fasten
1 Low viscosity,thixotropic viscosity
2 Suitable for most metal surfaces, parts can be disassembled with hand tools.
3 Ideal for fasteners diameters of M12 and smaller, controlled lubricity, can attain accurate clamp loads.
JH242 Threadlocking Adhesive
1 General purpose, medium strength,thixotropic viscosity.
2 For locking and sealing M6-M20 threads.
3 Parts can be separated with hand tools,controlled lubricity, can attain accurate clap loads.
JH243 Threadlocking Adhesive
1 Oil resistance,medium strength.
2 Fast curing, used on inert surface, improves oil tolerant, easy to disassemble, can be applied on surfaces with oil.
3 For fasteners smallers than M20
JH262 Threadlocking Adhesive
1 High strength
2 Thixotropic viscosity, excellent chemical resistance.
3 Suitable for most metal surfaces, for fasteners smaller than M20.
4 A permanent threadlocker.
5 Excellent for preventing rust and corrosion in extreme chemical environmental conditions.
JH271 Threadlocking Adhesive
1 High strength, low viscosity
2 For permanent locking and sealing, fasteners smaller than M36.
JH272 Threadlocking Adhesive
1 High temperature resistance,high strength.
2 Withstand temperatures up to 230°C.
3 For locking and sealing the thread of cylinder without being cleaned.
4 Provides a fast cure on most surfaces, including “as received” fasteners.
5 Recommended for bolts up to M36.Heating and hand tools are required for disassembly.
JH277 Threadlocking Adhesive
1 High strength, high viscosity.
2 Excellent chemicals resistance.
3 For permanent locking and sealing, bolts up to M36.
4 Prevent rust and corrosion of threaded fasteners. Heating and hand tools are required for disassembly.
JH290 Threadlocking Adhesive
1 Medium strength, low viscosity, fast curing.
2 For locking and sealing pre-assembled bolts M2-M12.Also for sealing welds and porous metal parts.
3 Prevent rust and corrosion. Heating and tools are required for disassembly
Technical Specification
Product | Container | Color | Viscosity(mPa.s) | Prevail torque(N.m) | Break torque(N.m) | Gap fill (mm) | Temperature (°C) | Fixture time/full cure time(min/h) |
JH222 | 10ml/50ml/250ml | Purple | 1200~5000 Thixotropic | 4 | 6 | 0.13 | -54~149 | 20/24 |
JH242 | 10ml/50ml/250ml | Blue | 1200~6000 Thixotropic | 4.8 | 12 | 0.13 | -54~149 | 20/24 |
JH243 | 10ml/50ml/250ml | Blue | 2250~12000 Thixotropic | 7 | 20 | 0.13 | -54~149 | 20/24 |
JH262 | 10ml/50ml/250ml | Red | 1800~5000 Thixotropic | 22 | 22 | 0.13 | -54~149 | 20/24 |
JH271 | 10ml/50ml/250ml | Red | 500 | 31 | 25 | 0.13 | -54~149 | 20/24 |
JH272 | 10ml/50ml/250ml | Red | 9500 | 25 | 23 | 0.25 | -54~230 | 30/24 |
JH277 | 10ml/50ml/250ml | Red | 7000 | 32 | 32 | 0.25 | -54~149 | 30/24 |
JH290 | 10ml/50ml/250ml | Green | 12 | 29 | 10 | 0.10 | -54~149 | 20/24 |
Loctite 272 Thread Locker 277 Anaerobic Adhesive 271
