two-in-one adhesive
remarkable performance,non-toxic,eco-friendly
properties of product
1.high bond strength,water-fast,frost resisting,thermostability
2. Good aging resistence
3.construction easily, high cost performance
Construction points:1.Base surface must be dry,clean,no oil and other dirts.When it is porous or too hot, you should wet the base surface slightly with clean water ,but do not soak the tiles.2.By water: powder = 1:5 weight ratio, put water into the container first, and then into powder while stiring, stir fully into a paste, put it aside for 5 minutes, then stir once againd and can use.3. this product must use 5.0-5.5kg water ,the mixed product must be used up within 2 hours, the remaining materials can not be used.4.Smear the mixed product on base surface with serrated trowel,and stretch to serrated grain,bond tiles to right position ,and exert to compact it.5.The bonding layer should not be less than 1.5mm;the gap width should not less than 1.5mm.Notes:1.Construction temperature should be 5°C~35°C,do not do the construction in rainy days.2.Use this product ,should match with SAMWOOD color joint mixure.Dosage reference:4~5kg per square metre.techonological data sheet
No. | items | standard request | test result | conclusion |
1 | Tensile bond strength | ≥0.60 M Pa | 0.88 M Pa | qualified |
2 | Ratio of compressive strength | ≤3.0 | 2.8 | qualified |
3 | strength | ≥0.6 M Pa | 1.08 M Pa | qualified |
4 | rating of temperature7d | ≥0.5 M Pa | 0.94 M Pa | qualified |
5 | water-fast 7d | ≥0.50 M Pa | 0.86 M Pa | qualified |
6 | resistence to freeze thawing | ≥0.5 M Pa | 0.69 M Pa | qualified |
7 | Linear contraction ratio | ≤0.3% | 0.22% | qualified |
two-in-one adhesive