1.the two component adhesive 2.best for the air filter 3.attend the auto exhibition 4.the ratio is 6:1 5.ISO 9001
Two-component room temperature curing filter adhesive component proportion ratio is 6:1 | ||
Material-A | Material-B | |
Physical nature | White Viscous liquid | Black |
Color | Based on your request to configure | |
Viscosity | 30-45kpa.s | |
Bond strength | Initial bonding strength20-21KN/CM2 | |
Peel strength | 40-48KN/CM2 | |
package | Plastic bucket or Tin bucket | Plastic pots |
Storage | 6-9 months | |
Working temperature | 15°C-35°C |
Usage: 1, cover the surface should be cleaned to remove oil, dust, and thoroughly dried, the surface can not have any oil, water and other foreign matter, otherwise it will affect the bonding strength. 2, A ingredients in the materials before mixing drums or inverted, according to mixing ratio A material and B material, and fully mix well. 3, the amount of adhesive into the end cap and place a moment, the adhesive coating on the surface of a flat cover all the parts. 4, will filter paper (or increase the central tube) into the cover and check the two bonding surface to ensure its full contact, standing at the top a little pressure.
5, after 4 hours of curing, the filp cover and bonding with another 24 hours to dry completely before packing,6 days after use.
http://www.apsanlian.com
http://cnfilteradhesive.en.alibaba.com
Anping Sanlian Filtering equipment Co.,LTD
welcome to the information obtained from the sample to facilitate you to test the adhesive properties,to make the right purchasing decisions to save money
polyurethane foam insulation (manufacturer)