1.a new type of high strength ceramic tile adhesive , 2.thin bed of 3-5mm 3.fast fixing rate 4.good workability,application Product Description The tile adhesive is developed according to the test center with spinning , high-quality synthetic resin and special additives , gray or white adhesive cement Features 1. The tile adhesive is a new type of high strength ceramic tile adhesive , suitable for all types of tile and stone plate paste2. Do not dip the brick wet wall construction can significantly improve efficiency , quick and easy. Highly absorbent tiles or base surface before soaking a few minutes or spray moist .3. Strong bond, and material, more secure, solid, and may also reduce construction waste and to reduce the wall weight compared with the traditional cement slurry paste method .4. Has a good impermeability and anti-aging properties , and environmental protection5.Can be directly used for leveling rough uneven was the base surface , or more smooth cement base surface Using Scope 1.Bond in the indoor and outdoor walls, or ceiling tiles and mosaic2. Fixed-point bonding insulation, sound insulation material. Such as expanded polystyrene , expanded polyurethane , fiberglass or wood wool cement board Indication
Project | Index |
Proportion | 1.45G/CM3 |
PH | 13 |
Construction of the temperature | 5.C~40.C |
Opening Hours | about 20min |
Tune sewing time | about 45min |
Rub slit time | WALL after 4-8 hours FLOOR after 24hours |
Can withstand the load of the People's Bank | after 24 hours |
Health of | 14 days |
Using Scope
1.Bond in the indoor and outdoor walls, or ceiling tiles and mosaic 2. Fixedpoint bonding insulation, sound insulation material. Such as expanded polystyrene , expanded polyurethane , fiberglass or wood wool cement board
Construction Points:
1.PREPARATION: Previously unpainted surface clean off dust , grease and looser matter ,surface should be clean, dry and stable .
2.The sun hot base should use water to cool
3.Powder and water ratio about 4:1( 20Kg/Bag ,about 5.5L water) ,use mixer mixing into uniform no precipitation paste. Place a few minutes then stirring can increase the strength
Caution:
1. Can not be used on the base of woodiness, metal, rubber,PVC and varnished cloth
2. Can not be used on drywalling
3. Can not be used on non hydroscopicity ceramic tile, such as clinker tile
Enviromental Super strength Ceramic Tile Adhesive for marble