Laser Power Supply 1.Controlled by TTL 2.Servince of OEM 3.Metal shell 4.CE
Product Main Features:
a. Good compatibility: It can be applicable to 40w and 60w laser tuber manufactured by various factories.
b. This power supply has TTL signal indication, eater through signal indication and output indication.
c. Easy Control: The start and stop of laser can be easily controlled by TTL level.
d. This power supply has the BUTTON to test output laser manually.
e. The power supply has output open circuit protection.
f. Application: handicraft, acrylic, leather, fabrics, rubber version of the material such as sculpture, cutting, etc.
The product specification:
MYKZ / MYJG-40W / MYJG-60W / MYJG-80W / MYJG-100W / MYJG-130W / MYJG-150W
Main Technical Parameters:
| AC Input Voltage | AC220V or AC110V | |
DC Input Voltage | DC300V or DC150V | |
AC Input Frequency | 47~440Hz | |
Voltage Output | 50KV | |
Maximum Current | 38mA (depending on the laser tubes of different manufacturers) | |
Efficiency | 91% | |
Overcurrent Protection | 130% of maximum current | |
Open Circuit Protection | Yes(short term) | |
Structure | Fan cooling | |
High Electric Level Control Voltage Range | ≥3V | |
Low Electric Level Control Voltage Range | ≤0.8V | |
Working Temperature | -30°C~+65°C | |
Relative Humidity | 20~85%RH(no condensation) | |
Voltage Resistance | Input—Output | AC1500V1minutes≤10mA |
Input—Shell | AC1500V1 minutes≤10mA | |
Output—Shell | Connection | |
Insulation Resistance | ≥50MΩ(DC500V) | |
Earth Leakage Current | ≤1mA(AC220V)≤0.5 mA(AC110V) | |
Vibration Resistance | Amplitude: 0.5mm frequency 10~55Hz 3D direction 2 hours | |
MTBF | ≥30,000hours | |
Test Time at Full Load and 60°C | 12 hours | |
Power Supply Switch Test within 7 Seconds | 500 times | |
Maximum Dimensions (L*W*H) | 350mm*220mm*95mm | |
MTJG-130W Laser Power Supply
130W Laser Power Supply
