Detailed Product Description
carbon steel cut wire shot/carbon steel wire shot- conditioned
size available:0.2mm-2.5mm
material: low carbon wire Q195 and spring wire
chemical composition1: C:0.06-0.12% Mn:0.25-0.5% Si:0.3%max S:0.05%max P:0.45max
chemical composition2 : C:0.7-0.78% Si:0.15-0.35% Mn:0.5-0.7% P:0.03max S:0.03%max
density: 7.84g/ cm³
hardness:30HRC/ 40-50HRC/ 45-55HRC/above 55HRC
Feature
1. As cylindrical or spherical cut wire is produced by new steel wire, it is absolutely free from micro structural defects, like presence of hyper entectole carbides and porosity 2. The size is stabilized due to the drawing process control and the cut process control
3. Equal hardness and excellent homogeneity because of high quality of raw materials and quality control methods
4. Higher durability compare to cast steel shots; steel cut wire shot or steel wire shot(spherical shape) is four times as efficient as steel shot
5. The components peened with conditioned cut wire shots have a greater fatigue life than the same components peened with cast steel shots
6. Less dust during operation contribute to a better work enviroment
7. Obviously effet on surface of parts, very bright and clean
8. Low wastage during operation
9. Reduce the time for shot peening and save electricity
10. Cut down maintenance cost of shot blasting machines and decrease production cost
11. Durability : 3000 circles to 8500 circles
12. High strength and non-friable, used by a wide range of machinery, equipment, vessel, container
Yongkang Sunshine Shot Blasting Material Co.,Ltd. produce
All kinds of metallic shot used for shot peening and shot blasting,surface treatment
Our shot including :
Carbon steel cut wire shot (from 0.25mm to 2.0mm) shape including as cut(cylindrical) and conditionedround shape.
Stainless steel shot from 0.2mm to 1.5mm (material include SUS304, 302, 430 410)
Stainless steel cut wire shot size from 0.2mm to 2.5mm, material include SUS304,SUS302, 430,410.
Zinc shot and zinc cut wire shot, size available: 0.6mm-2.5mm, shape as cut and conditioned, with Hardness 45-60HV and Hardness 35-60HV used for shot blasting and galvanization industry.
Aluminum cut wire shot and aluminum shot(size available: 0.6mm-3.0mm) with A1070 and 5056 material. hardness: 65-125HV
Copper shot and copper cut wire shot: 0.3mm-1.5mm, 0.3mnm-2.5mm kinds of material include brass shot(Cu:62%) and copper shot (Cu:99.99%)
The advantages of sunshine Shot :
1: Longer Durability ;
2: Uniform size;
3: Uniform Hardness;
4: less Dust
