1. Steel shot and grit manufacturer 2. SAE Standard 3. Good quality & Competitive price 4. Shot blasting, surface treatment
Details of Steel Grit:
G10, G12, G14, G16, G18, G25, G40, G50, G80, G120
1. Hardness: GP / GL / GH
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pretreatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
2. Tech Data:
Project | National Standards | Quality | |
Chemical Composition% | C | 0.85-1.20 | 0.85-1.0 |
Si | 0.40-1.20 | 0.70-1.0 | |
Mn | 0.60-1.20 | 0.75-1.0 | |
S | <0.05 | <0.030 | |
P | <0.05 | <0.030 | |
Hardness | GP | HRC46-50 | HRC 46-50 |
GL | HRC56-60 | HRC 56-60 | |
GH | HRC63-65 | HRC 63-65 | |
Density | ≥7.40 g/cm3 | 7.6 g/cm3 | |
microstructure | tempered martensite | The tempered martensite + bainite turns round organizes | |
Appearance | Polygon Spherical, hemispherical, flat-shaped particles<10% Crack 40% | Polygon, Spherical, hemispherical, flat-shaped particles<5% Crack 30% | |
3.TAA Steel grit available:
4. Packing picture:
TAA Metal is one of the global top five metal abrasive manufacturers with an annual production capacity of 150 thousand MT.
TTA Abrasive mainly covers:
Steel Shot: S110, S170, S230, S280, S330, S390, S460, S550, S660, S780
Steel Grit: G10, G12, G14, G16, G18, G25, G40, G50, G80, G120
Stainless Steel cut wire: 0.3, 0.4, 0.5, 0.6, 0.8, 1.2
Stainless Steel Shot: 0.2, 0.3, 0.4, 0.5, 0.6, 0.8
Steel cut wire
Chilled iron grit
Copper shot
Zinc shot
Aluminum shot
steel grit G50
