Chemical Product Machinery

Features: 1. The mixing barrel structure is unique. The mixing efficiency is high. 2. There is no dead corner. The barrel is made of stainless steel, and its internal and external walls are polished. 3. The exterior appearance is beautiful. The mixing is uniform, with wide application. The mixer meets the requirements of GMP standard. 4....

Description: This equipment is widely used for mixing powder or wet raw materials and can make main and auxiliary raw materials mix with different proportion uniform.The places where the raw material contact are made of stainless steel. The gap between blades is small and there is no dead corner in mixing. At the end of stirring shaft, there are...

Description: The machine is applicable for pharmaceutical, foodstuff, chemical, solid drink and so on industries. It can make well stirred raw materials become granules of required size or crush the blocked raw materials into small...

Principle: This machine makes damp granule into beautiful pellet by setting rotating centrifugal disk, blower and pneumatic nozzle. Feed damp granule into rotating centrifugal disk, start fan then start rotating centrifugal disk. It can make the damp granule undertaken the action of air floating force in ring gap, rotating centrifugal strength...

Description: Disk pelletizer's corner adopts the structure of overall circular arc and the ratio of forming particles reaches 93% or more. This granulating disk has three discharge holes, which facilitate intermittent production, largely reduce labor intensity and raise labor efficiency. The speed reducer and motor use flexible belt for...

Features: 1. The machine can make well mixed materials into the desired grains. It is especially suitable for the materials that have high viscosity. It is high in the grain making and shaping rate, perfect in the grain exterior appearance. Its automatic material discharge will avoid the grain from being damaged by manual material discharge....

Description: This machine is widely used in pharmaceutical, foodstuff and chemical industry. The powder material can be made into column, sheet and spherical shape. Principle: This machine adopts the principle of screw propelling feed. It can make column particle of 0.8-6mm by the front outlet model. The detailed requirements about the...

Features: 1. The machine adapts horizontal cylinder structure. Its structure is reasonable. 2. Use air filled seal shaft to drive. When washing, it can be changed to water. 3. Use fluidization to granulate and the granule is near spherical. 4. Compared with the traditional process, 25% of adhesive can be reduced and the drying time can be...

Features: 1. Integrate spraying, drying/fluid granulating in a body and reach the purpose of granulating in one step. 2. Using the process of spraying, it is particularly suitable for micro auxiliary raw materials and thermal sensitive raw materials. Its power is 1-2 times higher than FL Fluidizing Granulator. 3. The final moisture of...

Description: Powder or seed granule in rotated fluid-bed will undertake the action of air floating force in ring gap, rotating centrifugal force and gravity of itself and appear cycle rope strain shape. Adhesive or coat liquid will be sprayed into the layer of material to form pellet with high degree of spherical or continuous and uniform...